Please login or register.

Login with username, password and session length
Pages: [1] |   Go Down

Author Topic: Exhaust pipe below oil pan  (Read 515 times)

0 Members and 1 Guest are viewing this topic.


  • Dippy Die-Hard
  • ***
  • Offline
  • TX
  • Posts: 492
Exhaust pipe below oil pan
« on: May 16, 2020, 18:32:21 »

A while back I swapped out the steering gear. However, You must remove the drive side catalytic converter. However i could not get the bolts lose so i ended up removing the left exhaust manifold and using a sawzall to cut the exhaust pipe below the oil pan. At the time not realizing that the top of the pipe is flat.

So I have been driving for years now with an exhaust leak where the pipe was cut.

I want a clamp so that it can be removed. Since i need to replace the steering gear again since the one i got was faulty.

Anyone have any ideas on a clamp for the pipe with a flat side?
« Last Edit: May 16, 2020, 18:32:48 by DTSNEO6 »
Ex NHP 1984 Plymouth Gran Fury. WIP...
1987 Plymouth Gran Fury civvie.
1986 Dodge Diplomat

  • Advertisement
  • ***
Pages: [1] |   Go Up