Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[87xchpdiplomat]

I am looking for the air injection pipe mine has rust holes in it I could rap it temporary in muffler repair tape, but I need a new one. Any ideas??
?

[Dippy.org]

[MarkM]

Where are you located?  Most people just scrap the smog pump and associated crap rather than go through the expense of fixing it.  The car won't miss it at all.  If you're in an area that does inspection then you could try sleeving the tube depending on where the hole is.  Someone else should chime in regarding having good factory parts if you need.

[87xchpdiplomat]

Yes I live in California. Sleeve ing it on the outside with copper pipe? I live in the sf area so not many shops know what there doing..maybe 1\2 inch pipe cut in half ,something I have to try. Thanks for the reply

[MarkM]

Copper might work and even mild steel.  If it's a straight section, then measure the outside diameter with a pair of dial calipers and order some tubing online with the same inside diameter as your measurement.  Good luck!

[Ice Cold]

Tried slagging this off 3rd party a couple times, and now it's gone.
https://www.dippy.org/forum2/index.php?topic=16001.0

[spike]

You need the one that goes down to the cat?  Or the one that runs from each manifold?

[87xchpdiplomat]

Manifold, it has pinholes I tryed to  soter but more holes came thru. And its in the straight part.

[spike]

I got a couple manifold crossover ones that are good, just threw em in my scrap bin a couple months ago

[Ice Cold]

Just came back up.
https://www.kijiji.ca/v-other-auto-parts-and-accessories/oakville-halton-region/exhaust-y-pipe-1989-chrysler-5th-ave-or-dodge-diplmat/1281288345?enableSearchNavigationFlag=true

[spike]

I got this manifold crossover pipe

[rj2]

I have parts, but the labor removing them is extra...and shipping.