Please login or register.

Login with username, password and session length
Pages: [1] |   Go Down

Author Topic: Transmissions: Torqueflite Fluid Flow  (Read 20619 times)

0 Members and 1 Guest are viewing this topic.


  • Gran Fifthlomat Meister
  • Global Moderator
  • Dippy Oracle
  • *
  • Offline
  • Maryland - DMV Area
  • Posts: 5051
Transmissions: Torqueflite Fluid Flow
« on: December 31, 2007, 21:17:54 »

Torqueflite Transmission Fluid Flow

On all Torqueflites, the front fluid port is called the pressure port.  The rear fluid port is called the return port. During engine operation, transmission fluid is pumped from the front port through a hollow steel cooling line (pressure line) to a port in a separate oil to water cooling tank in the bottom of the radiator.  Cooled transmission fluid leaves the radiator tank and then travels through a second steel cooling line (return line) to the rear port.  The diagram below shows the direction of the fluid flow. Chrysler Corporation recommends that any auxilliary coolers be added in the system after the fluid leaves the radiator cooling tank.

  • Diagram courtesy of Chrysler Corporation
  • RWD Factory Service manual
« Last Edit: February 17, 2011, 22:22:12 by Reggie »
"There is only one success - to be able to spend your life in your own way." - Christopher Morley 1890-1957, American author and editor

Library format and content © 2007- 2012 Reginald A. Royster, Sr., unless otherwise authored or noted.

  • Advertisement
  • ***
Pages: [1] |   Go Up